Universal Speedball Monitor Arm (3 Inch)

Universal Speedball Monitor Arm (3 Inch) is an articulating arm with combination 1/4-20 and 3/8-16 mounting screws on each end, two double-ball clamps, and one 3 inch (75mm) extension with velcro cable wrap. Each ball end contains both mounting thread standards. Push the 3/8-16 outer screw down to reveal the hidden 1/4-20. Install the ball with the cam-lever in the down position to finger-tight, then lift the lever to add extra locking force to the assembly. The extra force of the cam-lever design allows the arm to lock in place without the use of messy rubber pads. The "Chip Clip" clamp design allows for easy, annoyance-free installation, and the ratcheting thumbscrew can be pulled out and repositioned. 3 inch arm has pass-through holes for 1/4-20 and 3/8-16 screws. Universal Speedball components are compatible with any other brand of 1 inch (25mm) ball attachment like Ultralight Control Systems, Wooden Camera, etc.
Universal Speedball Monitor Arm (3 Inch) is an articulating arm with combination 1/4-20 and 3/8-16 mounting screws on each end, two double-ball clamps, and one 3 inch (75mm) extension with velcro cable wrap. Each ball end contains both mounting thread standards. Push the 3/8-16 outer screw down to reveal the hidden 1/4-20. Install the ball with the cam-lever in the down position to finger-tight, then lift the lever to add extra locking force to the assembly. The extra force of the cam-lever design allows the arm to lock in place without the use of messy rubber pads. The Chip Clip clamp design allows for easy, annoyance-free installation, and the ratcheting thumbscrew can be pulled out and repositioned. 3 inch arm has pass-through holes for 1/4-20 and 3/8-16 screws. Universal Speedball components are compatible with any other brand of 1 inch (25mm) ball attachment like Ultralight Control Systems, Wooden Camera, etc.   Product Weight: 11.10oz (314g)Product Dimensions (WxLxH): 2.50 x 1.00 x 10.75in (63 x 25 x 273mm)

MID49 Universal Speedball Monitor Arm (3 Inch) Review - Newsshooter

Universal Speedball Monitor Mount is an articulating arm with combination 1/4-20 and 3/8-16 mounting screws on each end and one double-ball clamp. Each ball end contains both mounting thread standards. Push the 3/8-16 outer screw down to reveal the hidden 1/4-20. Install the ball with the cam-lever in the down position to finger-tight, then lift the lever to add extra locking force to the assembly.

Universal Speedball Monitor Mount by MID49

MID49 Universal Speedball Monitor Arm (3 Inch) Review - Newsshooter

MID49 Universal Speedball Monitor Arm (3 Inch) Review - Newsshooter

MOUNT PRO Triple Monitor Mount, 3 Monitor Desk Arm fits Three Max 27 LCD Computer Screens, up to 17.6lbs Each, Premium Gas Spring Monitor Stand with Tilt Swivel Rotation, Vesa Mount

MID49 Universal Speedball Monitor Arm (3 Inch) Review - Newsshooter

MID49 Universal Speedball Monitor Arm (3 Inch) Review - Newsshooter

Universal Ultra Arm v2 (Combo 1/4-20 & 3/8-16) — Wooden Camera

MOUNT PRO Triple Monitor Mount, 3 Monitor Desk Arm fits Three Max 27 LCD Computer Screens, up to 17.6lbs Each, Premium Gas Spring Monitor Stand with Tilt Swivel Rotation, Vesa Mount

Universal Compatibility and Premium Heavy-Duty Base - MOUNT PRO monitor mount for 3 monitors fits for 17-27 computer monitors with VESA 75x75mm and

MOUNT PRO Triple Monitor Mount, 3 Monitor Desk Arm fits Three Max 27 LCD Computer Screens, up to 17.6lbs Each, Premium Gas Spring Monitor Stand with