Turntable Cable RCA to Bare End with Ground Lugs — AMERICAN RECORDER TECHNOLOGIES, INC.

High performance audio cable designed specifically for use with turntables.  OFC wire with 100% spiral shield delivers superior signal transfer and low noise level.  Cables are hand terminated with high content silver solder.  In addition, there is an 18 awg chassis ground wire with fork connector. The ground wire exte

High performance audio cable designed specifically for use with turntables.  OFC wire with 100% spiral shield delivers superior signal transfer and low noise level.  Cables are hand terminated with high content silver solder. 

In addition, there is an 18 awg chassis ground wire with fork connector. The ground wire extends 6 at each end of the cable to ensure an easy connection to a chassis ground screw.  Durable and supple outer PVC jacket allows for easy cable connection and long cable life.

This version has left and right RCA plugs at one end and bare ends at the other end, making it ideal for upgrading the cables on vintage turntables.  Ground lugs at each end of course.

CABLE LENGTHS 

• 1 meter (3.3 ft)
• 1.5 meter (4.95 ft)
• 2 meter (6.6 ft)
• 3 meter (9.9 ft)
• 4 meter (13.2 ft)

FYI - Turntables use a magnetic cartridge and stylus to pick up the sound from the record groove.  The signal level from the magnetic cartridge is very low and must be connected to audio equipment with a PHONO level input.  When connecting a turntable to audio equipment without a phono input, an AMERICAN RECORDER VDC-141 PHONO PREAMP can be used, allowing connection to any line level input (CD, DVD, TAPE, etc.).

AMERICAN RECORDER Turntable Cable with Ground Terminal - RCA to Bare End - 1 Meter (3.3 feet) : Electronics

American Recorder Turntable Cable with Ground Terminal - RCA to Bare End, 1.5 Meters (4.9 feet) : Electronics

LessLoss C-MARC Bulk Wire and Cable - Superior Audio Wiring Solutions

High performance audio cable designed specifically for use with turntables. OFC wire with 100% spiral shield delivers superior signal transfer and low noise level. Cables are hand terminated with high content silver solder. In addition, there is an 18 awg chassis ground wire with fork connector. The ground wire extends 6 at each end of the cable to ensure an easy connection to a chassis ground screw. Durable and supple outer PVC jacket allows for easy cable connection and long cable life.

Turntable Cable RCA to Bare End with Ground Lugs - 1 Meter (3.3 ft)

American Recorder Phono Preamp

Turntable Cable RCA to Bare End with Ground Lugs, cable rca jack

SUPRA Dual 6.3 mm. Jack – RCA stereo audio cable, jack rca

REL T/7x Home Subwoofer with Bassline Blue 6M Cable

ANALOG - Ultra High Fidelity Magazine

Cables — AMERICAN RECORDER TECHNOLOGIES, INC.