Jamghe Dental Pro Model Resin (Grey)

[Jamghe 3D Printer Resin Dental Pro Model Resin] Ultra low shrinkage -- This is the lowest shrinkage resin among jamghe resins, ideal for restoration case, orthodontic case, implant case etc. High precision -- High accurate and non deformation for days during the whole process, makes the jobs in accurate size. Scratch Resistance -- Insure the accuracy of the insertion process between the die and model. Fast Printing -- DLP 1-3s/ each layer, LCD mono 2-3s/each layer, LCD RGB 6-8s/each layer. Widely compatible -- Suitable for DLP or LCD 405nm open system, whether LCD 2k or 4k, RGB or monochrome screen. * Technical SpecificationsFlexural modulus (MPa)：1.882-2.385 ±10% Flexural strength (MPa)： 49-58 ±10%Tensile strength (MPa)： 42-62 ±10% Viscosity (mPa·s) : 100-450Maximum pulling strength (N)：1367 ±10% Elongation at break (%)：11-20 ±10%Hardness (Shore D)：64-68 ±10% Tensile modulus (MPa)：1.86-2.64 ±10%Density (g/cm³)：1.05-1.18 Notched impact strength (J/m)：41-49 ±10%
[Jamghe 3D Printer Resin Dental Pro Model Resin] Ultra low shrinkage -- This is the lowest shrinkage resin among jamghe resins, ideal for restoration case, orthodontic case, implant case etc. High precision -- High accurate and non deformation for days during the whole process, makes the jobs in accurate size. Scratch Resistance -- Insure the accuracy of the insertion process between the die and model. Fast Printing -- DLP 1-3s/ each layer, LCD mono 2-3s/each layer, LCD RGB 6-8s/each layer. Widely compatible -- Suitable for DLP or LCD 405nm open system, whether LCD 2k or 4k, RGB or monochrome screen. * Technical SpecificationsFlexural modulus (MPa)：1.882-2.385 ±10% Flexural strength (MPa)： 49-58 ±10%Tensile strength (MPa)： 42-62 ±10% Viscosity (mPa·s) : 100-450Maximum pulling strength (N)：1367 ±10% Elongation at break (%)：11-20 ±10%Hardness (Shore D)：64-68 ±10% Tensile modulus (MPa)：1.86-2.64 ±10%Density (g/cm³)：1.05-1.18 Notched impact strength (J/m)：41-49 ±10%

JAMGHE Upgraded ABS-Like and Engineering Like 3D Printer Resin Hardness and Toughness 405nm UV-Curing 4k 6K 8k - AliExpress

3D Printer Resin,JamgHe 10K Water Washable Resin for LCD DLP SLA 405nm Printer UV-Curing Photopolymer Rapid High Precision Low Odor Standard Resin (Nebula Grey, 1000g) : Industrial & Scientific

Jamghe Standard Plus (Skin) 3D Printing Resin, 500g - CubicSky - 3D Printing Products - Saudi Arabia

Jamghe Dental Pro Model Resin (Grey)